Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to guard cars against key cloning or hacking is a small device that can be installed without damaging your vehicle. It prevents your vehicle from starting until you press an exact sequence of keys within your vehicle, similar to the password of a mobile phone.
Stop/Start
Ghost immobilisers stop vehicles from being stolen by stopping the engine from running until it is issued the correct PIN code. This is done with no modification to the vehicle and is totally undetectable to thieves. The unit communicates with the ECU on the CAN data bus to immobilise the vehicle. This system is very similar to the one that automobile manufacturers have used in their cars for years However, thieves cannot add a new key or use key relay technology to bypass it as they could with factory-installed systems.
Ghost Ghost can be fitted to any car, van motorhome, caravan, or bicycle with an engine. It is compatible with all popular makes of vehicles. The same system is compatible with electric vehicles. It is a great alternative to wheel clamps and steering wheel locks.
When the Ghost is armed it will block all the buttons in your vehicle and stop the ignition from being started until a PIN code has been entered before. This can be done using the Android or Apple mobile app or by manually entering the code via your key fob. If the wrong code is entered, the app will show an indicator light. The Ghost will then not allow the vehicle to be restarted. This is a great method to discourage thieves. If the vehicle cannot be started the thieves will be able to move on.
The Ghost is tiny, weatherproof device that can be hidden in the most difficult to access areas of your vehicle. It is incredibly easy to install with an average of 20-30 minutes per vehicle. It is also very easy to remove if you decide to move your vehicle around or hand it in for service or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by a few insurance companies. It is also equipped with a safe emergency Pin Code override and features a Service/Valet Mode that can be activated using the application's button or using your key fob.
Disarm
Ghost immobilisers, unlike mechanical anti-theft devices that are able to be removed, are concealed in the car. Even if they were to be found in the car, thieves wouldn't be able to start the car. They are nearly impossible to hack or bypass. This is because a ghost immobiliser blocks key hacking, signal jamming and device spoofing, all of which are methods that are used frequently by thieves to gain access to cars fitted with standard immobilisers.
An immobiliser works by sending an electronic code to the ECU (electronic control unit). If a incorrect code is received the vehicle will not be started because the engine will not start up. It is possible to disable a ghost immobiliser by using the aid of a software program, however it would be very difficult and time consuming to do so. The software can only be installed and used by an authorised installer.
The Ghost immobiliser, a small device, is hidden in the vehicle's wiring loom. It is inaccessible to the naked eye once installed. It does not appear on diagnostic systems. There are no LED indicators and it doesn't communicate with the engine via the OBD port. It communicates without sound through the CAN data circuit.
The system will not allow the vehicle to start unless it is given an input PIN code defined by the user. This code is entered using buttons on the steering wheels, door panels, or central console. This is a safer method of protecting your vehicle since it doesn't require keys or a remote control.
Ghost also comes with a service mode that can be activated via the mobile application. This lets you hand over your keys to someone else for valet parking or service without needing to enter the disarm sequence.
It is not recommended to remove the system on your Ghost by yourself, no matter whether it's in service mode. This could damage the engine. It is recommended to speak with an TASSA certified installer who will be able to remove the system safely and properly. Our newest GHOST immobilisers come with a unique fingerprint QR sticker that is hidden in different parts of your vehicle. These are linked to our security register. In the event that the device is removed and then sold on the blackmarket, this will allow you to trace the owner of the system.
Anti-Hijack
The anti-hijack function is a very important feature of the Ghost Immobiliser 2. This system functions as a smart key and is among the most secure ways to protect your vehicle from thieves. The Ghost system will automatically turn on the hazard light and stop the engine when the ignition is turned on and the vehicle is stationary. This gives the driver and passengers time to press the hidden security button before the system can be activated.
Contrary to many other systems that simply stop the engine whenever the ignition is switched on The Ghost system is based on a specific controller and timer unit that will close the fuel cut-off valve 14 when it is activated after the set time even if the ignition is still switched on! The delay time must be long enough for the hijacked vehicle owner to get away, and stay a safe distance from the vehicle that is stalled before the system can be activated.
The Ghost comes with added security that prevents common hacking methods used to gain entry to modern vehicles like relay attacks and key range expanding. This is due to the fact that the Ghost system is completely silent and does not emit any signals that can be picked up by a thief using RF scanning or code grabbing technology.
The Ghost system has a service / valet mode that allows your vehicle to be re-started and driven, without the need for PIN code. This is great when you park your vehicle and only need to leave it for a brief time, such as to open the garage door or put groceries in the boot. The system will end the service mode based on speed and time or through an easy PIN code input process. This gives you total assurance that only you can drive your car!
Keyless Entry
Many customers are looking for extra security measures due to the increasing trend of car thefts using contactless technology. This is particularly applicable to those who have put in time and money in customizing their car or own expensive automobiles. Add-on immobilisers can be a good way to deter this type of theft because they will stop your auto ghost immobiliser vehicle from starting until correct pin code has been entered along with your key fob.
Immobilisers are made to block a variety of vehicle circuits which include those that control the starter motor and the fuel pump. They also have the capability of shutting off the car alarm in order to draw attention and scare off any potential thieves.
These devices communicate directly with the engine control unit via the CAN data network. They prevent the thief from bypassing it by installing a new ECU or using key programmers. The immobilisers are fitted discretely and do not leave any marks on your vehicle. They are also not detected by sophisticated tools used by thieves.
The Ghost immobiliser is different from other systems that require the driver to carry an app or tag. Instead, you are able to select your own pin sequence by pressing the pattern on your steering, door panel, and the centre console. The pin can be changed as frequently as you like, meaning it's as secure as a credit card and can be more difficult to crack due to it requiring up to 20 presses.
Ghost also comes with a Valet/Service mode that lets you deactivate the system when your vehicle will be handed over to valet parking or services, enabling it to operate within set parameters, like 30mph speed limits, so you don't have to worry about your car being driven at a reckless speed. It can then be reactivated with the original key or the corresponding entry code.
This makes it the most efficient and secure aftermarket CAN immobiliser on the market, and is insurance approved by Thatcham as an optional accessory to your vehicle when installed by one of our certified installers. The Ghost 2 immobiliser comes with six QR fingerprint labels and an ISR contact card with your unique QR codes along with a secure emergency code. These are all kept in your wallet or purse.